top of page
ATF-23
23 SCFH oxygen production at 22 PSI is produced by an ATF-23 oxygen concentrator module.
 
Details:
 
ATF Oxygen Modules incorporate proven pressure swing adsorption (PSA) principles into a unique patented design, which allows these systems to be compact, efficient, rugged, and lower in cost. ATF modules offer unparalleled design flexibility and enable applications where on-site/on-board oxygen generation was previously impractical. 
A patented single rotary distribution valve built into the ATF module continually rotates at low speed by a small motor. The valve is maintenance-free, self-cleaning, insensitive to contamination, and invulnerable to wear. It directs the flow of compressed air to a group of four sieve beds (adsorption), while another four beds are purged into the atmosphere through the valve (desorption). The remaining four of the twelve beds are interconnected through the valve to equalize pressure as the sieve beds sequentially transition between adsorption and desorption. The small amplitutde pressure swings generated by the twelve sieve beds eliminate loud noise pulses, eliminate the need for a pressure regulator, and reduce compressor wear. 
 
SPECIFICATION SHEET

ATF-23

$2,216.70Price

  • Input Air Requirements:

    		  

    Flow

    120 LPM (4.2 SCFM)

    Pressure

    22 PSI (152 kPa)

    Performance Data:

    		  

    Product Flow

    11 LPM (23 SCFH)

    Oxygen Delivery Pressure

    7 PSI (48 kPa)

    Product Concentration

    90-95%

    Product Dew Point

    -100°F (-73°C)

    Dimensions (WxDxH)

    8 x 20 inches (21 x 51 cm)

    Weight

    14.7 lbs (6.7 kg)

    Physical Connections

    		  

    Compressed Air Inlet

    1/2" ID tubing

    Product Gas Outlet

    1/4" ID tubing

    Ambient Operating Conditions 

    Locate the oxygen concentrator system in a well-ventilated area that is protected from weather elements.

     

    Inside room or enclosure: Temps should remain between 40°F (4°C) and 130°F (54°C) 

     

    In storage: Temps should remain between 0°F (-18°C) and 140°F (60°C)

    Control Power Requirements (Single Phase)

    120 V / 208-240 V ~ ± 10%, 50 / 60 Hz, 0.025 A or 208-240 V ~ ± 10%, 50 Hz, 0.025A

    Typical Power Consumption

    3 W

    Gear Motor

    7371 (FMR 1268) / 7350 (FMR 1250)

    Compressed Air Input Requirements

    Clean Air (oil-less). Max Temp of 170°F (77°C). Performance Rated at 120°F (49°C).

    Mounting

    Two Integral Mounting Pads Provided.

    Toe Clamps (Optional)

    Vertical Mounting Preferred.

    Must Be Isolated From Compressor Vibration.
bottom of page